Bitwig • Can't run Bitwig on Manjaro

Code:

echo skia-gl > $HOME/.BitwigStudio/graphics-backend

Code:

$ inxi -zv8System:  Kernel: 6.9.12-lqx1-1-lqx arch: x86_64 bits: 64 compiler: gcc v: 14.1.1    clocksource: tsc avail: acpi_pm parameters: audit=0 intel_pstate=disable    BOOT_IMAGE=/boot/vmlinuz-linux-lqx    root=UUID=061bfd5e-d64c-49e5-9fbb-53062d0aa575 rw quiet    resume=UUID=77edc4d2-06b7-4b8c-af4c-c7757bbe342f  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.43 wm: xfwm4 v: 4.18.0    with: xfce4-panel tools: light-locker vt: 7 dm: 1: LightDM v: 1.32.0 2: SDDM    note: stopped Distro: Manjaro base: Arch LinuxMachine:  Type: Laptop System: Hewlett-Packard product: HP EliteBook 840 G2    v: A3009D410303 serial: <superuser required> Chassis: type: 10    serial: <superuser required>  Mobo: Hewlett-Packard model: 2216 v: KBC Version 96.5B    serial: <superuser required> part-nu: J8R60EA#ABU uuid: <superuser required>    UEFI: Hewlett-Packard v: M71 Ver. 01.27 date: 07/12/2018Battery:  ID-1: BAT0 charge: 24.8 Wh (97.6%) condition: 25.4/25.4 Wh (100.0%)    volts: 12.4 min: 11.4 model: Hewlett-Packard Primary type: Li-ion    serial: <filter> status: not chargingMemory:  System RAM: total: 8 GiB available: 7.18 GiB used: 2.77 GiB (38.6%)  Message: For most reliable report, use superuser + dmidecode.  Array-1: capacity: 16 GiB slots: 2 modules: 1 EC: None    max-module-size: 8 GiB note: est.  Device-1: Bottom-Slot 1(left) type: DDR3 detail: synchronous size: 8 GiB    speed: 1600 MT/s volts: N/A width (bits): data: 64 total: 64    manufacturer: Kingston part-no: KHX1600C9S3L/8G serial: <filter>  Device-2: Bottom-Slot 2(right) type: no module installedPCI Slots:  Permissions: Unable to run dmidecode. Root privileges required.CPU:  Info: model: Intel Core i7-5500U bits: 64 type: MT MCP arch: Broadwell    gen: core 5 level: v3 note: check built: 2015-18 process: Intel 14nm    family: 6 model-id: 0x3D (61) stepping: 4 microcode: 0x2F  Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache:    L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB    L3: 4 MiB desc: 1x4 MiB  Speed (MHz): avg: 2294 high: 2295 min/max: 500/2401 boost: enabled    scaling: driver: acpi-cpufreq governor: performance cores: 1: 2295 2: 2295    3: 2294 4: 2294 bogomips: 19154  Flags: 3dnowprefetch abm acpi adx aes aperfmperf apic arat arch_perfmon    avx avx2 bmi1 bmi2 bts clflush cmov constant_tsc cpuid cpuid_fault cx16    cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms est f16c flexpriority    flush_l1d fma fpu fsgsbase fxsr ht ibpb ibrs ida intel_pt invpcid lahf_lm    lm mca mce md_clear mmx monitor movbe msr mtrr nonstop_tsc nopl nx pae    pat pbe pcid pclmulqdq pdcm pdpe1gb pebs pge pln pni popcnt pse pse36 pti    pts rdrand rdseed rdtscp rep_good sdbg sep smap smep ss ssbd sse sse2    sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_adjust    tsc_deadline_timer vme vmx vnmi vpid x2apic xsave xsaveopt xtopology xtpr  Vulnerabilities:  Type: gather_data_sampling status: Not affected  Type: itlb_multihit status: KVM: VMX disabled  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT    vulnerable  Type: mds mitigation: Clear CPU buffers; SMT vulnerable  Type: meltdown mitigation: PTI  Type: mmio_stale_data status: Unknown: No mitigations  Type: reg_file_data_sampling status: Not affected  Type: retbleed status: Not affected  Type: spec_rstack_overflow status: Not affected  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via    prctl  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer    sanitization  Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; IBRS_FW;    STIBP: conditional; RSB filling; PBRSB-eIBRS: Not affected; BHI: Not    affected  Type: srbds mitigation: Microcode  Type: tsx_async_abort status: Not affectedGraphics:  Device-1: Intel HD Graphics 5500 vendor: Hewlett-Packard ZBook 15u G2    Mobile Workstation driver: i915 v: kernel arch: Gen-8 process: Intel 14nm    built: 2014-15 ports: active: eDP-1 empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2    bus-ID: 00:02.0 chip-ID: 8086:1616 class-ID: 0300  Display: x11 server: X.Org v: 21.1.13 compositor: xfwm4 v: 4.18.0 driver:    X: loaded: intel dri: iris gpu: i915 display-ID: :0.0 screens: 1  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")    s-diag: 582mm (22.93")  Monitor-1: eDP-1 mapped: eDP1 model: AU Optronics 0x133d built: 2014    res: 1920x1080 hz: 60 dpi: 157 gamma: 1.2 chroma: red: x: 0.643 y: 0.337    green: x: 0.314 y: 0.620 blue: x: 0.149 y: 0.051 white: x: 0.314 y: 0.329    size: 310x170mm (12.2x6.69") diag: 354mm (13.9") ratio: 16:9    modes: 1920x1080  EDID-Warnings: 1: parse_edid: unknown flag 2  API: Vulkan v: 1.3.279 layers: 9 device: 0 type: integrated-gpu name: Intel    HD Graphics 5500 (BDW GT2) driver: mesa intel v: 24.1.3-manjaro1.1    device-ID: 8086:1616 surfaces: N/A  API: OpenGL Message: Unable to show GL data. glxinfo is missing.Audio:  Device-1: Intel Broadwell-U Audio vendor: Hewlett-Packard    driver: snd_hda_intel v: kernel bus-ID: 00:03.0 chip-ID: 8086:160c    class-ID: 0403  Device-2: Intel Wildcat Point-LP High Definition Audio    vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus-ID: 00:1b.0    chip-ID: 8086:9ca0 class-ID: 0403  API: ALSA v: k6.9.12-lqx1-1-lqx status: kernel-api with: aoss    type: oss-emulator tools: alsactl,alsamixer,amixer  Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl  Server-2: JACK v: 1.9.22 status: active with: 1: a2jmidid status: active    2: nsmd status: off tools: agordejo, cadence, jack_control, jack_mixer,    qjackctl  Server-3: PipeWire v: 1.2.1 status: off tools: pw-cli  Server-4: PulseAudio v: 17.0 status: active with: 1: pulseaudio-alsa    type: plugin 2: pulseaudio-jack type: module tools: pacat,pactl,pavucontrolNetwork:  Device-1: Intel Ethernet I218-LM vendor: Hewlett-Packard driver: e1000e    v: kernel port: 5080 bus-ID: 00:19.0 chip-ID: 8086:15a2 class-ID: 0200  IF: enp0s25 state: down mac: <filter>  Device-2: Intel Wireless 7265 driver: iwlwifi v: kernel pcie: gen: 1    speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 8086:095a class-ID: 0280  IF: wlo1 state: up mac: <filter>  IP v4: <filter> type: dynamic noprefixroute scope: global    broadcast: <filter>  IP v6: <filter> type: dynamic noprefixroute scope: global  IP v6: <filter> type: noprefixroute scope: link  Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant  WAN IP: <filter>Bluetooth:  Message: No bluetooth data found.Logical:  Message: No logical block device data found.RAID:  Message: No RAID data found.Drives:  Local Storage: total: 3.64 TiB used: 2.73 TiB (75.1%)  SMART Message: Unable to run smartctl. Root privileges required.  ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 850 EVO 4TB    size: 3.64 TiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s    tech: SSD serial: <filter> fw-rev: 2B6Q scheme: GPT  Message: No optical or floppy data found.Partition:  ID-1: / raw-size: 122.07 GiB size: 119.84 GiB (98.18%)    used: 80.83 GiB (67.4%) fs: ext4 dev: /dev/sda3 maj-min: 8:3 label: N/A    uuid: 061bfd5e-d64c-49e5-9fbb-53062d0aa575  ID-2: /boot/efi raw-size: 497 MiB size: 496 MiB (99.80%)    used: 49.9 MiB (10.1%) fs: vfat dev: /dev/sda1 maj-min: 8:1 label: N/A    uuid: A27D-524E  ID-3: /run/media/me/data raw-size: 3.19 TiB size: 3.14 TiB (98.40%)    used: 2.66 TiB (84.6%) fs: ext4 dev: /dev/sda6 maj-min: 8:6 label: N/A    uuid: be07e4f2-9d3f-4157-b3af-bb4ba093d0c3Swap:  Kernel: swappiness: 10 (default 60) cache-pressure: 100 (default) zswap: yes    compressor: lz4 max-pool: 20%  ID-1: swap-1 type: partition size: 15.26 GiB used: 0 KiB (0.0%)    priority: -2 dev: /dev/sda5 maj-min: 8:5 label: N/A    uuid: 77edc4d2-06b7-4b8c-af4c-c7757bbe342fUnmounted:  ID-1: /dev/sda2 maj-min: 8:2 size: 61.04 GiB fs: ext4 label: N/A    uuid: 3ffef06f-042c-4c31-85a9-df054c4fffe8USB:  Hub-1: 1-0:1 info: full speed or root hub ports: 3 rev: 2.0    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002    class-ID: 0900  Hub-2: 1-1:2 info: Intel Integrated Hub ports: 8 rev: 2.0    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 8087:8001    class-ID: 0900  Hub-3: 2-0:1 info: hi-speed hub with single TT ports: 11 rev: 2.0    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002    class-ID: 0900  Hub-4: 2-3:2 info: Microchip (formerly SMSC) Hub ports: 4 rev: 2.1    speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 0424:2134    class-ID: 0900  Hub-5: 3-0:1 info: super-speed hub ports: 4 rev: 3.0    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 1d6b:0003    class-ID: 0900  Hub-6: 3-3:2 info: Microchip (formerly SMSC) Hub ports: 4 rev: 3.0    speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 chip-ID: 0424:5534    class-ID: 0900Sensors:  System Temperatures: cpu: 59.0 C mobo: N/A  Fan Speeds (rpm): N/ARepos:  Packages: 2680 pm: pacman pkgs: 2672 libs: 514 tools: pamac,yay pm: flatpak    pkgs: 8  Active pacman repo servers in: /etc/pacman.conf    1: https://arch.osamc.de/$repo/$arch  Active pacman repo servers in: /etc/pacman.d/mirrorlist    1: https://www.mirrorservice.org/sites/repo.manjaro.org/repos/stable/$repo/$arch    2: https://mirror.23m.com/manjaro/stable/$repo/$arch    3: https://ftp.nluug.nl/pub/os/Linux/distr/manjaro/stable/$repo/$arch    4: http://ftp.tu-chemnitz.de/pub/linux/manjaro/stable/$repo/$arch    5: https://mirrors.ft.uam.es/manjaro/stable/$repo/$arch    6: https://uvermont.mm.fcix.net/manjaro/stable/$repo/$arch    7: https://coresite.mm.fcix.net/manjaro/stable/$repo/$arch    8: http://manjaro.mirror.ac.za/stable/$repo/$arch    9: http://mirror.is.co.za/mirrors/manjaro.org/stable/$repo/$arch    10: https://ct.mirror.garr.it/mirrors/manjaro/stable/$repo/$archProcesses:  CPU top: 5 of 262  1: cpu: 99.6% command: BitwigStudio pid: 3520 mem: 542.0 MiB (7.3%)  2: cpu: 22.4% command: firefox pid: 1780 mem: 549.2 MiB (7.4%)  3: cpu: 7.6% command: firefox pid: 3296 mem: 243.5 MiB (3.3%)  4: cpu: 7.1% command: firefox pid: 3417 mem: 263.2 MiB (3.5%)  5: cpu: 4.4% command: firefox pid: 2822 mem: 260.0 MiB (3.5%)  Memory top: 5 of 262  1: mem: 549.2 MiB (7.4%) command: firefox pid: 1780 cpu: 22.4%  2: mem: 542.0 MiB (7.3%) command: BitwigStudio pid: 3520 cpu: 99.6%  3: mem: 263.2 MiB (3.5%) command: firefox pid: 3417 cpu: 7.1%  4: mem: 260.0 MiB (3.5%) command: firefox pid: 2822 cpu: 4.4%  5: mem: 243.5 MiB (3.3%) command: firefox pid: 3296 cpu: 7.6%Info:  Processes: 262 Power: uptime: 23m states: freeze,mem,disk suspend: deep    avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,    suspend, test_resume image: 2.86 GiB services: upowerd,xfce4-power-manager    Init: systemd v: 256 default: graphical tool: systemctl  Compilers: clang: 18.1.8 gcc: 14.1.1 alt: 12 Shell: Bash v: 5.2.26    running-in: xfce4-terminal inxi: 3.3.35

Code:

$ bitwig-studio [2024-8-2 8:44:46.794 info] About to start the following process:  /opt/bitwig-studio/bin/show-splash-gtk /opt/bitwig-studio/resources/splash-bitwig-studio.png[2024-8-2 8:44:46.796 info] Child process launched with PID 4177[2024-8-2 8:44:46.797 info] Backing up log file "/home/me/.BitwigStudio/log/BitwigStudio.log" to "/home/me/.BitwigStudio/log/BitwigStudio-previous-run.log"[2024-8-2 8:44:46.797 info] About to start the following process:  /opt/bitwig-studio/bin/BitwigStudio -cp /opt/bitwig-studio/bin/bitwig.jar:/opt/bitwig-studio/lib/cp:/opt/bitwig-studio/bin/libs.jar -Dorg.sqlite.lib.path=/opt/bitwig-studio/lib/bitwig-studio -XX:+UseZGC -XX:+ZGenerational -Xms300m -Xmx3g -Djava.io.tmpdir=/tmp/bitwig-me -DinstallationRoot=/opt/bitwig-studio -DsplashPid=4177 -Djava.awt.headless=true -XX:ErrorFile=/home/me/.BitwigStudio/bitwig-studio-jvm-crash.log com.bitwig.flt.app.BitwigStudioMain[2024-8-2 8:44:46.797 info] Redirecting stdout to /home/me/.BitwigStudio/log/BitwigStudio.log[2024-8-2 8:44:46.798 info] Redirecting stderr to /home/me/.BitwigStudio/log/BitwigStudio.log[2024-8-2 8:44:46.799 info] Child process launched with PID 4178

Code:

[0m[2024-8-2 8:44:46.798 info] stdout successfully redirected[0m[0m[2024-8-2 8:44:46.798 info] stderr successfully redirected[0mUsing log directory /home/me/.BitwigStudio/log[2024-08-02 08:44:47.287 float-main-app info] Starting application version 5.2 revision bebb77d7f52679180fd2d7fc443a5c7cad91a6d5[2024-08-02 08:44:47.302 float-main-app info] Using Java version 21.0.2 from Private Build installed at /opt/bitwig-studio/lib/jre[2024-08-02 08:44:47.303 float-main-app info] Running on Linux[2024-08-02 08:44:47.309 float-main-app info] Linux installation: /opt/bitwig-studio[2024-08-02 08:44:47.310 float-main-app info] Environment variables:PATH : /home/me/.local/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/sbinLD_LIBRARY_PATH : /opt/bitwig-studio/lib/bitwig-studio:[2024-08-02 08:44:47.310 float-main-app info] Starting with arguments [2024-08-02 08:44:52.587 gui-toolkit-core info] Using locale en[2024-08-02 08:44:53.279 base-platform info] Using /dev/shm/bitwig-posix-me/BitwigStudio for POSIX resource tracking[2024-08-02 08:44:53.301 float-main-app info] System UUID: 9e3400f2-bd36-33ab-ba15-ec732f141601[2024-08-02 08:44:53.844 float-main-app info] Loaded preferences from file /home/me/.BitwigStudio/prefs/5.2.prefs[2024-08-02 08:44:53.846 float-telemetry info] Starting TelemetrySLF4J: No SLF4J providers were found.SLF4J: Defaulting to no-operation (NOP) logger implementationSLF4J: See https://www.slf4j.org/codes.html#noProviders for further details.[2024-8-2 8:44:54.234 info] resolving Bitwig Graphics JNI[2024-8-2 8:44:54.236 info] successfuly resolved Bitwig Graphics JNI[2024-8-2 8:44:54.242 skia info] checking if Vulkan is available...[2024-8-2 8:44:54.258 skia info] Using "Intel(R) HD Graphics 5500 (BDW GT2)" vulkan physical device[2024-8-2 8:44:54.272 skia info] Vulkan is available[2024-08-02 08:44:54.273 windowing-system-core info] Initializing graphics backend using skia-vulkan[2024-08-02 08:44:54.274 skia-graphics info] Initializing Skia graphics backend using vulkan[2024-8-2 8:44:54.274 skia info] begin skia initialization[2024-8-2 8:44:54.297 skia info] skia Library initialized[2024-8-2 8:44:54.297 skia info] selected rendering backend: 3[2024-08-02 08:44:54.373 float-main-app info] Using overridden package repository location: "https://packs.bitwig.com"[2024-08-02 08:44:54.386 package-manager info] Usable package ids changed [][2024-08-02 08:44:55.076 notifications warning] No Audio Device selected: You need to choose an Audio Device before using Bitwig Studio[2024-8-2 8:44:55.529 skia info] about to create GPU context: 3[2024-8-2 8:44:55.562 skia info] Using "Intel(R) HD Graphics 5500 (BDW GT2)" vulkan physical device[2024-8-2 8:44:55.596 skia info] GPU context created